Showing 219 products
The SeekTech SR-20 Locator is a lightweight yet rugged receiver that provides all the information needed for faster, more accurate locates. Target line and guidance arrows quickly identify distortion. Trace any frequency from 10 Hz to 35 kHz.
Red Hot Sewer Solvent is a strong alkaline compound used in opening sewers and drains by reacting quickly on grease, rags, paper, and other organic material. Heats up rapidly and “burns” for several minutes. Outstanding for use as a preventative maintenance product that will save time, labor, and money.
We ship this by truck due to needing Hazmat. LTL so we would need to know if its residential, if they need a lift gate.
The Ripsaw HD blasts a 0-degree straight water stream at up to 3200 PSI while rotating at a high speed to provide an 18-degree cone of coverage. The cone-shaped flow pattern is ideally suited for potholing applications.
Minimum Inlet Pressure: 1,000 PSI (69 Bar)
Maximum Inlet Pressure: 3,200 PSI (220 Bar)
Maximum Water Temperature: 180°F (+82°C)
Housing Material: Stainless Steel
Coating Material: Hytrel
Nozzle Tip Material: Tungsten Carbide
Inlet Connection Thread: 1/2" FNPT
Rebuild kits are available for extended nozzle life and lower overall operating costs. Kit includes inlet screen, rotor assembly, insert, and seat retainer.
The Ripsaw HD blasts a 0-degree straight water stream at up to 3200 PSI while rotating at a high speed to provide an 18-degree cone of coverage. The cone-shaped flow pattern is ideally suited for potholing applications.
Minimum Inlet Pressure: 1,000 PSI (69 Bar)
Maximum Inlet Pressure: 3,200 PSI (220 Bar)
Maximum Water Temperature: 180°F (+82°C)
Housing Material: Stainless Steel
Coating Material: Hytrel
Nozzle Tip Material: Tungsten Carbide
Inlet Connection Thread: 1/2" FNPT
The Ripsaw HD blasts a 0-degree straight water stream at up to 3200 PSI while rotating at a high speed to provide an 18-degree cone of coverage. The cone-shaped flow pattern is ideally suited for potholing applications.
Minimum Inlet Pressure: 1,000 PSI (69 Bar)
Maximum Inlet Pressure: 3,200 PSI (220 Bar)
Maximum Water Temperature: 180°F (+82°C)
Housing Material: Stainless Steel
Coating Material: Hytrel
Nozzle Tip Material: Tungsten Carbide
Inlet Connection Thread: 1/2" FNPT
Rebuild kits are available for extended nozzle life and lower overall operating costs. Kit includes inlet screen, rotor assembly, insert, and seat retainer.
The Ripsaw HD blasts a 0-degree straight water stream at up to 3200 PSI while rotating at a high speed to provide an 18-degree cone of coverage. The cone-shaped flow pattern is ideally suited for potholing applications.
Minimum Inlet Pressure: 1,000 PSI (69 Bar)
Maximum Inlet Pressure: 3,200 PSI (220 Bar)
Maximum Water Temperature: 180°F (+82°C)
Housing Material: Stainless Steel
Coating Material: Hytrel
Nozzle Tip Material: Tungsten Carbide
Inlet Connection Thread: 1/2" FNPT
Rebuild kits are available for extended nozzle life and lower overall operating costs. Kit includes inlet screen, rotor assembly, insert, and seat retainer.
The Leader Hose is an essential tool for high-pressure jetting applications, offering greater flexibility and control compared to standard jetting hoses. Designed for safety and efficiency, it helps prevent live nozzles from entering manholes and enables precise adjustments to water pressure.
This is the short, high pressure, different colored hose attached to the end of the main high pressure jetting hose. They are purposely a different color from the main hose so that when the operator sees that color hose coming out of the pipe, they know the nozzle is approaching the end of the pipe, and they should shut their machine off.
All leader hoses come with a female end that attaches to the main high pressure hose and a male end that the nozzle attaches to.
This is the short, high pressure, different colored hose attached to the end of the main high pressure jetting hose. They are purposely a different color from the main hose so that when the operator sees that color hose coming out of the pipe, they know the nozzle is approaching the end of the pipe, and they should shut their machine off.
All leader hoses come with a female end that attaches to the main high pressure hose and a male end that the nozzle attaches to.
